Cisco Cisco TelePresence MX700 Manual De Manutenção

Página de 170
D15331.01 MX700 and MX800 Administrator Guide CE8.0, NOVEMBER 2015.  
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved. 
52
Cisco TelePresence MX700 and MX800
Administrator Guide
Sign in to the web interface and navigate to 
Configuration > 
System Configuration
, to find the settings referred.
Use the 
Cameras > SpeakerTrack > Mode
 setting to enable or 
disable speaker tracking.
Off: Speaker tracking is switched off permanently.
Auto: Speaker tracking is enabled in general. Users can 
switch it on or off instantly with the camera control panel on 
the Touch controller.
Set up speaker tracking
About speaker tracking
The following Cisco TelePresence 
products support speaker tracking: 
•  MX700 and MX800 with dual camera
•  SpeakerTrack 60 camera
The two cameras in the assembly work 
together with a built-in microphone array 
to automatically track and show the 
person that speaks.
Tracking mode
The tracking mode defines how fast the camera view switch to a 
new speaker when the tracking algorithm detects a change. 
Use the 
Cameras > SpeakerTrack > TrackingMode 
setting to 
select between the two modes.
Auto: This is the default setting.
Conservative: The system reacts slower to detected changes, 
and the camera view will switch to a new speaker later.
You can also use the Administrator Settings menu on the 
Touch controller to switch between the two tracking modes. 
•  Tap 
Settings > Administrator 
and sign in. 
•  Tap 
Tracking
, and set 
Tracking Mode
 to 
FAST (auto) or 
NORMAL (conservative).
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
Peripherals