Cisco Cisco TelePresence MX700 Folheto
Adding a new device.
Log in to Cisco Unified CM Administration and navigate to Device > Phone.
Log in to Cisco Unified CM Administration and navigate to Device > Phone.
Device
Phone
1
Manual registration of the endpoint
Manual registration of the TelePresence endpoint is required when
the Cisco Unified CM is set to mixed mode (cluster security mode).
Adding a new device
1. Navigate to Device > Phone.
Add a New Phone (endpoint)
2. Click the Add new button and navigate to the Create a phone using the
phone type or a phone template section:
• From the Phone Type drop down list select the endpoint type.
• Click the Next button.
• Click the Next button.
Device Information
3. Navigate to the Device Information section:
MAC Address: Enter the MAC Address of the endpoint.
Device Pool: Choose a Device Pool.
Phone Button Template: Choose a Phone Button Template.
Click Save.
3
2
Cisco TelePresence Endpoints running TC6 and Cisco Unified Communications Manager 9.0
Quick Reference Guide
D14996.01 Administering TC6 Endpoints on CUCM 9.0, January 2013.
www.cisco.com — Copyright © 2013 Cisco Systems, Inc. All rights reserved.
18
Contents
Introduction
Endpoint configuration
CUCM configuration
Setting passwords
Appendices
CUCM configuration