Cisco Cisco IOS Software Release 12.0(19)S

Router(config-controller)# aps group 33

Router(config-controller)# aps protect 1 11.11.11.11

This section documents new and modified commands. All other commands used with this feature are 
documented in the Cisco IOS Release 12.0 command reference publications (see 

).

 

 

 

To enable reporting of selected alarm and signal events for ISE line card controllers and serial interfaces, 
use the alarm-report configuration command. To disable reporting of alarm and signal events, use the 
no form of this command.

alarm-report {all | event}

no alarm-report 

SONET/SDH controller default values: sf-ber, slos, slof, b1-tca and b2-tca

DS-3 and E3 channelized interface default values: b3-tca and plop

Enables all of the alarm and signal events available for the interface or 
controller. See “Usage Guidelines” for more information on the events 
available with controllers and serial interfaces.

Enables reporting for the specified alarm or signal events listed.