Cisco Cisco IOS Software Release 12.4(2)T
SSG—Limiting the Number of Sessions and Services
Configuring SSG to Limit Sessions and Services
3
Cisco IOS Release 12.4(2)T
Configuring SSG to Limit Sessions and Services
To configure this SSG feature to limit sessions and services, perform the following tasks:
•
•
•
Limit the Number of Host Objects on an SSG Device
This section describes how you can use the
command to limit the number of host
objects that can be enabled on an SSG device. Using this command helps to prevent a router from
experiencing resource exhaustion when the number of logon-requests exceed the router’s limitations.
experiencing resource exhaustion when the number of logon-requests exceed the router’s limitations.
This section includes the following topics:
•
•
•
SUMMARY STEPS
This section lists the command sequence required to limit the number of host objects that can be enabled
on an SSG device.
on an SSG device.
,
next.
1.
enable
2.
configure terminal
3.
ssg maximum host number-of-hosts
4.
end
DETAILED STEPS
This section provides a detailed summarization of the command sequence, with examples, required to
limit the number of host objects that can be enabled on an SSG device.
limit the number of host objects that can be enabled on an SSG device.
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure
terminal
Example:
Router# configure terminal
Enters global configuration mode.