Cisco Cisco IOS Software Release 12.2(4)T
Cisco 2600 and 3600 Routers MGCP Voice Gateway Interoperability with Cisco CallManager
Monitoring and Maintaining MGCP Support for the Cisco CallManager
24
Cisco IOS Release 12.2(2)XB and 12.2(4)T
Monitoring and Maintaining MGCP Support for the
Cisco CallManager
Cisco CallManager
Configuration Examples
This section provides the following configuration examples:
•
•
•
•
Following the configuration examples there is a display of a current configuration. Go to
.
Router’s Ethernet Interface Configuration Example
In the following example, there is a Cisco 3600 series router and one FastEthernet 10/100 port.
router(config)# interface fastethernet 0/0
router(config-if)# ip address 10.0.0.200 255.255.255.0
router(config-if)# no shut
Command
Purpose
Router# debug ccm-manager [errors | packets | events]
Displays Cisco CallManager errors.
errors—Displays Cisco CallManager errors.
packets—Displays errors related to
Cisco CallManager packets.
Cisco CallManager packets.
events—Displays errors related to
Cisco CallManager events such as when the
primary Cisco CallManager failed and control
switched to the backup Cisco CallManager.
Cisco CallManager events such as when the
primary Cisco CallManager failed and control
switched to the backup Cisco CallManager.
Router# show ccm-manager [hosts | redundancy]
Displays a list of Cisco CallManagers, as well as
their status and availability.
their status and availability.
hosts—Displays each configured
Cisco CallManager, its operational status, and its
host address.
Cisco CallManager, its operational status, and its
host address.
redundancy—Displays failover mode and status
information, including the redundant link port, the
failover interval, keepalives, MGCP traffic time,
switchover, and switchback.
information, including the redundant link port, the
failover interval, keepalives, MGCP traffic time,
switchover, and switchback.