Cisco Cisco IOS Software Release 12.2(35)SE
3
Release Notes for the Cisco Catalyst Blade Switch 3030, Cisco IOS Release 12.2(37)SE and Later
OL-12639-02
Upgrading the Switch Software
Software Requirements
lists the supported operating systems and browsers for using the device manager. The device
manager verifies the browser version when starting a session to ensure that the browser is supported.
Note
The device manager does not require a plug-in.
Upgrading the Switch Software
These are the procedures for downloading software. Before downloading software, read this section for
important information:
important information:
•
•
•
•
•
Finding the Software Version and Feature Set
The Cisco IOS image is stored as a bin file in a directory that is named with the Cisco IOS release. A
subdirectory contains the files needed for web management. The image is stored on the system board
flash device (flash:).
subdirectory contains the files needed for web management. The image is stored on the system board
flash device (flash:).
You can use the show version privileged EXEC command to see the software version that is running on
your switch. The second line of the display shows the version.
your switch. The second line of the display shows the version.
You can also use the dir filesystem: privileged EXEC command to see the directory names of other
software images that you might have stored in flash memory.
software images that you might have stored in flash memory.
Table 3
Supported Operating Systems and Browsers
Operating System
Minimum Service Pack or Patch
Microsoft Internet
Explorer
Explorer
1
1.
Service Pack 1 or higher is required for Internet Explorer 5.5.
Netscape
Navigator
Navigator
Windows 98
None
5.5 or 6.0
7.1
Windows NT 4.0
Service Pack 6 or later
5.5 or 6.0
7.1
Windows 2000
None
5.5 or 6.0
7.1
Windows XP
None
5.5 or 6.0
7.1