Cisco Cisco WT2750 Multipoint Broadband Wireless System Guia De Informação

radio cable−loss auto

!−−− Usually set to "auto."

radio transmit−power 20

!−−− Acceptable range for Multichannel Multipoint Distribution Service (MMDS)

!−−− is 15 to 38 dBm. For Unlicensed National Information Infrastructure

!−−− (UNII), it is −5 to 15 dBm.

radio upstream frequency 2677000 width 6.0

radio upstream 0 subchannel 1 modulation−profile 2

!−−− Refer to modulation−profile and sub−channel chart above.

radio upstream 0 target−receive−power −65

no radio upstream 0 shutdown

no radio upstream 1 target−receive−power

radio upstream 1 shutdown

no radio upstream 2 target−receive−power

radio upstream 2 shutdown

no radio upstream 3 target−receive−power

radio upstream 3 shutdown

radio downstream frequency 2521000 width 6.0

!−−− Default width is 6 MHz.

radio downstream subchannel 1 modulation−profile 1

!−−− Refer to the modulation−profile and sub−channel chart.

radio dhcp−giaddr policy

radio helper−address 10.1.1.5

!−−− IP address of the DHCP server, if you do not use DHCP on HE router

!−−− (see the next question).

radio su−onoff−trap interval 600

Q. How do you configure the HE to run TOD, TFTP, and DHCP all in one?

A. Make sure that you have the latest "T" code when you use this configuration. Do not
enable the radio helper address command in your configuration because the DISCOVER
packet does not need to be "helped" to another machine, the packet resides on the HE.

service udp−small−servers max−servers no−limit

radio time−server

ip dhcp pool modems−c3

!−−− Modems−c3 is just a string.

network 10.30.128.0 255.255.240.0

bootfile p2mp.cm

next−server 10.30.128.1

!−−− Radio interface.

default−router 10.30.128.1

option 7 ip 10.30.128.1