Cisco Cisco 2504 Wireless Controller Guia De Resolução De Problemas
This page shows all monitoring data in an easy and accessible manner. In order to reach the "old"
and complete GUI, you can click Advanced in the upper right corner. Once you are in Advanced
mode, you cannot go back to the express GUI unless you configured the WLC. As a benefit of the
Express Setup GUI, you will have a home button on the upper right corner of the WLC page to
return to the Express monitoring page.
and complete GUI, you can click Advanced in the upper right corner. Once you are in Advanced
mode, you cannot go back to the express GUI unless you configured the WLC. As a benefit of the
Express Setup GUI, you will have a home button on the upper right corner of the WLC page to
return to the Express monitoring page.
In order to configure the 2504 via the Express Setup GUI, you need to connect a PC to port 2, wait
for the SYS led to turn green, and then browse to 192.168.1.1 in your browser. This only works on
port 2, which allows you to connect port 1 of the WLC for network connectivity.
for the SYS led to turn green, and then browse to 192.168.1.1 in your browser. This only works on
port 2, which allows you to connect port 1 of the WLC for network connectivity.
Configuration of the controller via the Express Setup GUI also changes various default settings to
better match small businesses deployments.
better match small businesses deployments.
A special wizard will then appear for configuration:
Note:
The express GUI setup wizard (Day 0 interface) can be accessed through either a wired connected client or a
wireless client. The easy GUI setup wizard on a wired connection only appears when you plug in a wired client and there