Cisco Cisco 4100 Series Wireless LAN Controller Referências técnicas
5/26/05
config ap primary-base
OL-7427-02
config ap primary-base
config ap primary-base
To set the Cisco 1000 Series lightweight access point primary Cisco Wireless LAN Controller, use the
config ap primary-base command. The Cisco 1000 Series lightweight access point associates with this
Cisco Wireless LAN Controller for all network operation and in the event of a hardware reset.
config ap primary-base command. The Cisco 1000 Series lightweight access point associates with this
Cisco Wireless LAN Controller for all network operation and in the event of a hardware reset.
>config ap primary-base <Controller name> <Cisco AP>
Syntax
config
Configure parameters.
ap
Cisco 1000 Series lightweight access point.
primary-base
Cisco 1000 Series lightweight access point primary
Cisco Wireless LAN Controller.
Cisco Wireless LAN Controller.
<Controller name>
Name of Cisco Wireless LAN Controller.
<Cisco AP>
Cisco 1000 Series lightweight access point name.
Defaults
(none)
Examples
>config ap primary-base SW_1 AP2
Related Commands
show sysinfo, config sysname, config ap secondary-base, config ap
tertiary-base
tertiary-base