Cisco Cisco 4100 Series Wireless LAN Controller Referências técnicas

 

config snmp community mode

To enable or disable an SNMP community, use the config snmp community mode command.

config snmp community

Configure SNMP community parameters.

mode

Change the state.

<enable/disable>

Enable or disable the community.

<name>

Community name.

(none)

>config snmp community mode disable public

show snmp community, config snmp community accessmode, config snmp 
community create, config snmp community delete, config snmp community 
ipaddr

config snmp syscontact

To set the SNMP system contact name, use the config snmp syscontact command.

config

Configure parameters.

snmp

SNMP parameters.

syscontact

System contact. 

<contact>

Name (Up to 31 alphanumeric characters).

(none)

>config snmp syscontact Cisco SWAN_administrator

show snmpcommunity

config snmp syslocation

To set the SNMP system location name, use the config snmp syslocation command.

config

Configure parameters.

snmp

SNMP parameters.

syslocation

System location. 

<location>

Name (Up to 31 alphanumeric characters).

(none)

>config snmp syslocation Building_2a

show snmpcommunity

config snmp trapreceiver

Use the following config snmp trapreceiver commands:

•

•