Cisco Cisco 4100 Series Wireless LAN Controller Referências técnicas

 

config sessions timeout

To configure the inactivity timeout for telnet CLI sessions, use the config sessions timeout command.

config

Configure parameters.

sessions

Telnet CLI session parameters.

timeout

Duration of CLI sessions.

<0-160> 

Timeout of telnet session in minutes.

5.

>config sessions timeout 20

show sessions

config snmp community

Use the following config snmp community commands:

•

 

•

•

•

 

•

config snmp community accessmode

To modify the access mode (Read only or Read/Write) of an SNMP community, use the config snmp 
community accessmode command.

config

Configure parameters.

snmp

SNMP parameters.

community

SNMP community parameters.

accessmode

Access privileges.

ro/rw

Read only or Read/Write.

<name>

Community name.

Two communities are provided by default with the following parameters:

SNMP Community Name Client IP Address Client IP Mask   Access Mode Status

------------------- ----------------- ---------------- ----------- ------

public              0.0.0.0           0.0.0.0          Read Only   Enable

private             0.0.0.0           0.0.0.0          Read/Write  Enable

>config snmp community accessmode rw private

show snmp community, config snmp community mode, config snmp community 
create, config snmp community delete, config snmp community ipaddr

config snmp community create

To create a new SNMP community, use the config snmp community create command. Use this 
command to create a new community with the following default configuration: