Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
vlan
To assign a VLAN to an AP group, use the vlan command. To remove a VLAN ID, use the no form of this
command.
command.
vlan interface-name
no vlan
Syntax Description
VLAN interface name.
interface-name
Command Default
None
Command Modes
wlan-apgroup
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
You must disable the WLAN before using this command.
Examples
This example shows how to configure a VLAN on an AP group:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
ap group ap-group-1
Controller(config-apgroup)#
wlan test-wlan
Controller(config-wlan-apgroup)#
vlan 3
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
560
OL-29471-01
vlan