Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
wgb non-cisco
To enable non-Cisco Workgroup Bridges (WGB) clients on the WLAN, use the wgb non-cisco command.
To disable support for non-Cisco WGB clients, use the no form of this command.
To disable support for non-Cisco WGB clients, use the no form of this command.
wgb non-cisco
no wgb non-cisco
Syntax Description
This command has no keywords or arguments.
Command Default
Non-Cisco WGB clients are disabled.
Command Modes
WLAN
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
You must disable the WLAN before using this command.
Examples
This example shows how to enable non-Cisco WGBs on a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
shutdown
Controller(config-wlan)#
wgb non-cisco
Controller(config-wlan)#
no shutdown
This example shows how to disable support for non-Cisco WGB clients on a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
shutdown
Controller(config-wlan)#
no wgb non-cisco
Controller(config-wlan)#
no shutdown
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
561
wgb non-cisco