Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
ap dot11 rrm group-member
To configure members in an 802.11 static RF group, use the ap dot11 rrm group-member command. To
remove members from 802.11 RF group, use the no form of this command.
remove members from 802.11 RF group, use the no form of this command.
ap dot11 {24ghz| 5ghz} rrm group-member controller-name controller-ip
no ap dot11 {24ghz| 5ghz} rrm group-member controller-name controller-ip
Syntax Description
Specifies the 2.4 GHz band.
24ghz
Specifies the 5 GHz band.
5ghz
Name of the controller to be added.
controller-name
IP address of the controller to be added.
controller-ip
Command Default
None
Command Modes
Global configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Examples
This example shows how to add a controller in the 5 GHz band RF group:
Controller(config)#
ap dot11 5ghz rrm group-member cisco-controller 192.0.2.54
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
648
OL-29471-01
ap dot11 rrm group-member