Cisco Cisco 5760 Wireless LAN Controller Referências técnicas

ap dot11 rrm logging

To configure report log settings on supported 802.11 networks, use the ap dot11 rrm logging command.

ap dot11 {24ghz| 5ghz} rrm logging {channel| coverage| foreign| load| noise| performance| txpower}

Syntax Description

Specifies the 2.4 GHz band.

24ghz

Specifies the 5 GHz band.

5ghz

Turns the channel change logging mode on or off. The default mode is off
(Disabled).

channel

Turns the coverage profile logging mode on or off. The default mode is off
(Disabled).

coverage

Turns the foreign interference profile logging mode on or off. The default mode
is off (Disabled).

foreign

Turns the load profile logging mode on or off. The default mode is off
(Disabled).

load

Turns the noise profile logging mode on or off. The default mode is off
(Disabled).

noise

Turns the performance profile logging mode on or off. The default mode is off
(Disabled).

performance

Turns the transit power change logging mode on or off. The default mode is
off (Disabled).

txpower

Command Default

Disabled

Command Modes

Global configuration

Command History

Modification

Release

This command was introduced.

Cisco IOS XE 3.2SE

Examples

This example shows how to turn the 5 GHz logging channel selection mode on:

Controller(config)#

ap dot11 5ghz rrm logging channel

Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)

OL-29471-01

649

ap dot11 rrm logging