Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
snmp-server enable traps bulkstat
To enable data-collection-MIB traps, use the snmp-server enable traps bulkstat command in global
configuration mode. Use the no form of this command to return to the default setting.
configuration mode. Use the no form of this command to return to the default setting.
snmp-server enable traps bulkstat [collection | transfer]
no snmp-server enable traps bulkstat [collection | transfer]
Syntax Description
(Optional) Enables data-collection-MIB collection traps.
collection
(Optional) Enables data-collection-MIB transfer traps.
transfer
Command Default
The sending of data-collection-MIB traps is disabled.
Command Modes
Global configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
Specify the host (NMS) that receives the traps by using the snmp-server host global configuration command.
If no trap types are specified, all trap types are sent.
If no trap types are specified, all trap types are sent.
Informs are not supported in SNMPv1.
Note
To enable more than one type of trap, you must enter a separate snmp-server enable traps command for
each trap type.
each trap type.
Examples
This example shows how to generate data-collection-MIB collection traps:
Controller(config)#
snmp-server enable traps bulkstat collection
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
955
snmp-server enable traps bulkstat