Cisco Cisco 5760 Wireless LAN Controller Referências técnicas
snmp-server enable traps cef
To enable SNMP Cisco Express Forwarding (CEF) traps, use the snmp-server enable traps cef command
in global configuration mode. Use the no form of this command to return to the default setting.
in global configuration mode. Use the no form of this command to return to the default setting.
snmp-server enable traps cef [inconsistency | peer-fib-state-change | peer-state-change | resource-failure]
no snmp-server enable traps cef [inconsistency | peer-fib-state-change | peer-state-change |
resource-failure]
resource-failure]
Syntax Description
(Optional) Enables SNMP CEF Inconsistency traps.
inconsistency
(Optional) Enables SNMP CEF Peer FIB State change traps.
peer-fib-state-change
(Optional) Enables SNMP CEF Peer state change traps.
peer-state-change
(Optional) Enables SNMP CEF Resource Failure traps.
resource-failure
Command Default
The sending of SNMP CEF traps is disabled.
Command Modes
Global configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
Specify the host (NMS) that receives the traps by using the snmp-server host global configuration command.
If no trap types are specified, all trap types are sent.
If no trap types are specified, all trap types are sent.
Informs are not supported in SNMPv1.
Note
To enable more than one type of trap, you must enter a separate snmp-server enable traps command for
each trap type.
each trap type.
Examples
This example shows how to generate SNMP CEF inconsistency traps:
Controller(config)#
snmp-server enable traps cef inconsistency
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
957
snmp-server enable traps cef