Cisco Cisco Email Security Appliance C170 Referências técnicas

Access to the CLI varies depending on the management connection method 
chosen while setting up the appliance. The factory default username and password 
are listed next. Initially, only the admin user account has access to the CLI. You 
can add other users with differing levels of permission after you have accessed the 
command line interface for the first time via the admin account. The system setup 
wizard asks you to change the password for the admin account. The password for 
the admin account can also be reset directly at any time using the 

password

 

command. 

To connect via Ethernet: Start an SSH or Telnet session with the factory default 
IP address 192.168.42.42. SSH is configured to use port 22. Telnet is configured 
to use port 23. Enter the username and password below. 

To connect via a Serial connection: Start a terminal session with the 
communication port on your personal computer that the serial cable is connected 
to. See the “Setup and Installation” chapter in the Cisco IronPort AsyncOS 
Configuration Guide for more information. Enter the username and password 
below. 

Log in to the appliance by entering the username and password below.

Username: 

Password: 

For example: 

This section describes the rules and conventions of the AsyncOS CLI.

login: admin

password: ironport