Cisco Cisco Email Security Appliance C170 Referências técnicas
C H A P T E R
1
Cisco IronPort AsyncOS 7.6 CLI Reference Guide
2
Command Line Interface: The Basics
This chapter contains the following sections:
•
•
Command Line Interface (CLI)
The IronPort AsyncOS Command Line Interface is an interactive interface
designed to allow you to configure and monitor the IronPort appliance. The
commands are invoked by entering the command name, or in the case of batch
format commands the command name with arguments (or parameters). If you
enter the command without arguments, the command prompts you for the required
information.
designed to allow you to configure and monitor the IronPort appliance. The
commands are invoked by entering the command name, or in the case of batch
format commands the command name with arguments (or parameters). If you
enter the command without arguments, the command prompts you for the required
information.
The Command Line Interface is accessible via SSH or Telnet on IP interfaces that
have been configured with these services enabled, or via terminal emulation
software on the serial port. By factory default, SSH and Telnet are configured on
the Management port. Use the
have been configured with these services enabled, or via terminal emulation
software on the serial port. By factory default, SSH and Telnet are configured on
the Management port. Use the
interfaceconfig
command described in “Other
Tasks in the GUI” in the Cisco IronPort AsyncOS Daily Management Guide to
disable these services.
disable these services.