Cisco Cisco Email Security Appliance C170 Guia Da Instalação
3-9
Cisco 170 Series Hardware Installation Guide
OL-28365-01
Chapter
Figure 3-2
Removing Preinstalled Die-Cast Brackets on Either Side of the Appliance
Step 2
Install a fixed rack-mount bracket to both sides of the appliance by aligning the screw holes on the
appliance to the slots and holes on the bracket. The bracket will be set back from the front faceplate
(bezel). Secure each bracket with three screws. See
appliance to the slots and holes on the bracket. The bracket will be set back from the front faceplate
(bezel). Secure each bracket with three screws. See
Figure 3-3
Attaching the Rack-Mount Brackets
Step 3
Install the appliance with the front bezel facing the cold aisle so that air flows from front to back. See
.