Cisco Cisco Email Security Appliance C170 Guia Do Utilizador
33-3
User Guide for AsyncOS 9.7 for Cisco Email Security Appliances
Chapter 33 System Administration
Management of the Appliance
What To Do Next
When you are ready to resume suspended services, see
.
Resuming Suspended Email Receiving and Delivery
Use the Shutdown/Suspend page or the r
esume
command to resume the suspended receiving and delivery
of emails.
Procedure
Step 1
Select System Administration > Shutdown/Suspend.
Step 2
In the Mail Operations section, select the functions and/or listeners to resume.
If the appliance has multiple listeners, you can resume email receiving on individual listeners.
Step 3
Resume the delivery of all emails or emails to a particular domain or multiple domains.
In Specify Domain(s)/Subdomain(s) field, click the close icon on the intended entry.
Step 4
Click Commit.
Resetting to Factory Defaults
Caution
Do not reset to factory defaults if you are not able to reconnect to the web interface or CLI using the
Serial interface or the default settings on the Management port through the default Admin user account.
Serial interface or the default settings on the Management port through the default Admin user account.
When physically transferring the appliance, you may want to start with factory defaults. Resetting to
factory settings is extremely destructive, and it should only be used when you are transferring the unit
or as a last resort to solving configuration issues. Resetting to factory defaults disconnects you from the
web interface or CLI, disabling services that you used to connect to the appliance (FTP, SSH, HTTP,
HTTPS), and even removing additional user accounts you had created. You can reset to factory default:
factory settings is extremely destructive, and it should only be used when you are transferring the unit
or as a last resort to solving configuration issues. Resetting to factory defaults disconnects you from the
web interface or CLI, disabling services that you used to connect to the appliance (FTP, SSH, HTTP,
HTTPS), and even removing additional user accounts you had created. You can reset to factory default:
–
On web interface, click the Reset button in the System Administration > Configuration File
page, or click the Reset Configuration button in the System Administration> System Setup
Wizard.
page, or click the Reset Configuration button in the System Administration> System Setup
Wizard.
–
On CLI, use the
resetconfig
command.
Note
The
resetconfig
command only works when the appliance is in the offline state. The
appliance returns to the online state after resetting to factory settings.
Next Steps
•
Run the System Setup wizard. For more information, refer to