Cisco Cisco Aironet 340 Ethernet Bridges Guia Do Utilizador
Installing the Aironet 340 Series Bridge 1 - 3
Installation
Installing the Antennas
Before installing your bridge system, we recommend that you test the
bridge using the 2.2 dBi dipole antenna included in your package.
Once testing is completed, install your wireless bridge for use with
the appropriate antenna for your application using the following the
instructions.
bridge using the 2.2 dBi dipole antenna included in your package.
Once testing is completed, install your wireless bridge for use with
the appropriate antenna for your application using the following the
instructions.
1.
With the unit powered off, attach the lightening arrestor to the
antenna connector.
NOTE: Do not over-tighten; finger tight is sufficient. Position the antenna
ver tically for best omni-directional signal reception.
Figure 1.2 - Attaching the Antenna
10Base2
10Base5
10BaseT