Cisco Cisco Aironet 340 Ethernet Bridges Guia Do Utilizador

1.

Attach the Console Port cable to the Serial Port. Attach the other 

cable end to the Serial Port on a terminal or a PC running a terminal 
emulation program. Use a 9-pin male to 9-pin female straight 
through cable (Figure 1.3).

NOTE: This connection is required for setting up initial configuration infor-

mation. After configuration is completed, this cable may be removed until 

additional configuration is required via the Serial Port.

2.

Set the terminal to 9600 Baud, No-Parity, 8 data bits, 1 Stop bit, and 

ANSI compatible.