Cisco Cisco Aironet 340 Ethernet Bridges Guia Do Utilizador
6 - 4 Aironet 340 Series Bridge
2.
If the destination is in the local subnet, ARP is used to determine the
nodes MAC address.
3.
If the destination address is on another subnet and matches the infra-
structure portion of a net entry in the table (using the associated
subnet mask), the packet will be forwarded to the MAC address cor-
responding to the next hop IP address from the table entry.
subnet mask), the packet will be forwarded to the MAC address cor-
responding to the next hop IP address from the table entry.
4.
If the destination address is on another subnet and does not match
any entry in the table, the packet will be forwarded to the MAC
address corresponding to the default gateway’s IP address.
address corresponding to the default gateway’s IP address.
Most subnets only have one router which is always used to access the
rest of the network. Use the Gateway option to set the IP address of the
default router. This address is also used if the destination address does
not match any entries in the routing table described below.
rest of the network. Use the Gateway option to set the IP address of the
default router. This address is also used if the destination address does
not match any entries in the routing table described below.
The Routing options allows your to set specific entries in the routing
table.
table.
Use the Host option to add an entry for a single host. You will be
prompted for the IP address of the host. Use the Net option to add an
entry for an external subnet. You will be prompted for a network address
and a subnet mask to identify the remote network. Use the Delete option
to delete a table entry.
prompted for the IP address of the host. Use the Net option to add an
entry for an external subnet. You will be prompted for a network address
and a subnet mask to identify the remote network. Use the Delete option
to delete a table entry.
The Display options show the current table.
Configuration Ident Routing Menu
Option Value Description
1 - Display - Display route table entries
2 - Host - Add a static host route
3 - Net - Add a static network route
4 - Delete - Delete a static route
Enter an option number or name, “=” main menu, <ESC> previous menu
>_
Routing Table
Destination Next Hop Mask Flags Use
---------------- --------------- --------------- ------ ---
149.023.166.000 149.023.165.071 255.255.255.000 S N 0
default 149.023.165.050 000.000.000.000 S N 0
149.023.130.020 149.023.165.060 255.255.255.000 S H 0