Cisco Cisco Aironet 1200 Access Point
5
Release Notes for Cisco Aironet 1130AG, 1200, 1230AG, and 1240AG Series Access Points for Cisco IOS Release 12.3(7)JX9
OL-14252-01
Installation Notes
Use Only One Power Option
You cannot provide redundant power to 1130AG and 1200 series access points with both DC power to
its power port and inline power from a patch panel or powered switch to the access point’s Ethernet port.
If you apply power to the access point from both sources, the switch or power patch panel might shut
down the port to which the access point is connected.
its power port and inline power from a patch panel or powered switch to the access point’s Ethernet port.
If you apply power to the access point from both sources, the switch or power patch panel might shut
down the port to which the access point is connected.
shows the power configuration that can
shut down the port on the patch panel or powered switch.
Figure 1
Improper Power Configuration Using Two Power Sources
Configuring Power for 1130AG Access Points
The 1130AG access point disables the radio interfaces when the unit senses that the power source to
which it is connected does not provide enough power. Depending on your power source, you might need
to enter the power source type in the access point configuration. Use the System Software: System
Configuration page on the web-browser interface to select a power option.
which it is connected does not provide enough power. Depending on your power source, you might need
to enter the power source type in the access point configuration. Use the System Software: System
Configuration page on the web-browser interface to select a power option.
shows the System
Power Settings section of the System Configuration page.
Figure 2
Power Options on the System Software: System Configuration Page
Using the AC Power Adapter
If you use the AC power adapter to provide power to the 1130AG access point, you do not need to adjust
the access point configuration.
the access point configuration.
Universal
power supply
SYST
RPS
DUPLX
MODE
SPEED
UTIL
STAT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
23
24
10Base-T / 1
00Base-TX
100Base-FX
Catalyst 2950
SERIES
Switch with
inline power or
power patch panel
Access point
74329