Cisco Cisco Aironet 3500e Access Point Ficha De Dados

To mount the antenna on a pole or mast, you will need these supplies:

Two U-bolts 

Cisco recommends using a guillotine-style U-bolt or a U-bolt with a 
notched, toothed backing plate to ensure proper support and permanent 
positioning.

The pole or mast must be rigid enough to hold the weight of the antenna 
plus the associated forces produced by wind loads.  In addition, the pole 
or mast must be structurally strong enough to withstand the clamping 
force of the U-bolts.

You may need the following tools and equipment, which are not provided:

A drill and drill bit

A pencil

Follow these steps to mount your antenna on a wall or ceiling.

Remove the antenna and bracket from the shipping container. The antenna and 
bracket are attached and the bracket is locked in place to facilitate shipping.

Use a 10-mm wrench to loosen and remove the adjustment bolt from the shipping 
position (

).