Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Exec Modes Commands (D-S)
▀ save configuration
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
save configuration
Saves the current contexts configuration to a local or remote location.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Default: saves to the location of the active configuration currently loaded.
Specifies the location to store the configuration file(s).
Specifies the location to store the configuration file(s).
may refer to a local or a remote file.
must be
entered using one of the following formats:
Specifies the source of the copy.
Specifies the source of the copy.
may refer to a local or a remote file.
must be entered using one of
the following formats:
ASR 5000:
[
]{
|
|
}[
]
{
[
] }[
]
[
[
] ]{
} [
][
]
is the directory name.
is the actual file of interest.
Important:
Configuration files should be named with a .cfg extension.
is the user to be authenticated.
is the password to use for authentication.
is the password to use for authentication.
is the IP address or host name of the server.
Important:
can only be used if the
parameter is configured for DHCP and the
DHCP server returns a valid nameserver.
is the logical port number that the communication protocol is to use.
This keyword directs the system to save the CLI configuration file to the local device, defined by the url
variable, and then automatically copy that same file to the like device on the standby processing card, if
available.
variable, and then automatically copy that same file to the like device on the standby processing card, if
available.
Important:
This keyword will only work for local devices that are located on both the active and standby
processing cards. For example, if you save the file to the /pcmcia1 device on the active processing card, that same type