Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Exec Modes Commands (D-S)
▀ save logs
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
save logs
Saves the current log file to a local or remote location.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Specifies the location to store the log file(s).
may refer to a local or a remote file.
must be entered
using one of the following formats:
Specifies the source of the copy.
Specifies the source of the copy.
may refer to a local or a remote file.
must be entered using one of
the following formats:
Important:
Use of the SMC hard drive is not supported in this release.
is the directory name.
is the actual file of interest.
is the user to be authenticated.
is the password to use for authentication.
is the user to be authenticated.
is the password to use for authentication.
is the IP address or host name of the server.
Important:
can only be used if the
parameter is configured for DHCP and the
DHCP server returns a valid nameserver.
is the logical port number that the communication protocol is to use.
Indicates output is to display data from active logs.
Indicates output is to display data from inactive logs.
Specifies a call ID for which log information is to be displayed. call_id must be specified as a 4-byte
hexadecimal number.
hexadecimal number.