Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Border Gateway Protocol Configuration Mode Commands
router-id ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
router-id
Override the configured router identifier (peers will reset).
Product
HA
Privilege
Security Administrator, Administrator
Syntax
Remove the specified router ID from the router‘s configuration and use the default router ID.
The IP address to use as the BGP router ID.
must be an IPv4 address in dotted decimal
notation (###.###.###.###).
Usage
Use this command to configure a specific router ID that overrides the default.
Example
The following command sets the router ID to 192.168.100.25:
router-id 192.168.100.25
The following command sets the router ID to 192.168.100.25:
router-id 192.168.100.25