Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
ASN Paging Controller Configuration Mode Commands
▀ paging-group
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
paging-group
Use this command to create or remove the Paging-Group Identifier within a specific ASN paging controller service.
Product
ASN PC-LR
Privilege
Administrator
Syntax
This command disables or removes the paging group identifier from a specific ASN paging controller service.
Use this command to configure the paging group identifier and other parameters within a specific ASN
paging controller service.
This is a logical network identifier for the serving BS or other network entity that retains MS service and
operational information or administers paging activity for the MS while it is in idle mode
paging controller service.
This is a logical network identifier for the serving BS or other network entity that retains MS service and
operational information or administers paging activity for the MS while it is in idle mode
must be an integer from 1 through 65535.
The command executes without any additional prompt and confirmation from you.
W
ARNING
:
If you use this keyword option with
command, the
is deleted and disabled with all active or inactive configurations in a
paging group. There are no prompts, warning, or confirmations.
Usage
Use this command to enter, enable, or disable the Paging Group Identifier Configuration mode functionality
within a specific ASN paging controller service.
within a specific ASN paging controller service.
Important:
Configure a maximum of 32 paging groups within a service.
Example
The following command configures the paging group identifier as
The following command configures the paging group identifier as
for the ASN paging controller service: