Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
ASN Paging Controller Configuration Mode Commands
▀ peer-asnpc
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
peer-asnpc
Use this command to configure the peer Anchor Paging Controller(s) in this ASN PC/LR service.
Product
ASN PC-LR
Privilege
Administrator
Syntax
Removes the configured peer ASN PC/LR MAC address and IP address as the trusted peer anchor ASN
PC/LR.
PC/LR.
Specifies the MAC address of the trusted peer system running the ASN paging controller and location
registry service.
registry service.
is the MAC address of the paging controller in standard (IEEE 802) format in six groups of
two hexadecimal digits, separated by hyphens (-) or colons (:).
Specifies the IP address of the trusted peer system running the ASN paging controller and location registry
service.
service.
is the IP address of the paging controller in the standard IPv4 format of dotted decimal
notation.
Usage
Use this command to configure the trusted peer anchor paging controller for ASN paging controller service.
This command provides the input for the internal mapping from PC ID to IP address that is needed to forward
the Location Update request from an Anchor PC to the current Anchor PC during PC relocation.
This command provides the input for the internal mapping from PC ID to IP address that is needed to forward
the Location Update request from an Anchor PC to the current Anchor PC during PC relocation.
Example
The following command sets the peer AS NPC id to
The following command sets the peer AS NPC id to
in colon (:) separated format and the IP
address of the paging controller to 1.1.1.1: