Cisco Cisco Packet Data Gateway (PDG) Manual De Manutenção
Generally Available 06-30-2010
New Configuration Commands
3-5
hopath-sdsf
This command defines the high-order path SDSF bit error rate (BER) threshold.
CLI (Channelized Port Configuration Mode)
hopath-sdsf hopath_value
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
hopath-sdsf
This command defines the high-order path SDSF bit error rate (BER) threshold.
CLI (Channelized Port Configuration Mode)
hopath-sdsf hopath_value
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
ingress-mode
This command toggles between enabling and disabling the port ingress mode.
CLI (Port Ethernet Configuration Mode)
ingress-mode
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
initial-e1-framing
With this keyword, the user has the option to choose the boot-time framing mode for all the E1s on the
line card.
CLI (Card Configuration Mode Commands)
initial-e1-framing [ crc4 | standard ]
default initial-e1-framing
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
ipv6 access-list
A new command mode was added to configure IPv6 ACL commands.
CLI (Exec Mode Commands)
ipv6 access-list name
The following commands are included in this mode:
●
deny/permit (any)