Cisco Cisco Packet Data Gateway (PDG) Manual De Manutenção

Generally Available 06-30-2010

New Configuration Commands

3-7

●

redirect nexthop (any)

●

redirect nexthop (by host IP address)

●

redirect nexthop (by IP address masking)

●

redirect nexthop (by IP packets)

●

redirect nexthop (by source ICMP packets)

●

redirect nexthop (by TCP/UDP packets)

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

line-timing

This command instructs the system to recover the receive timing source from an external
device via the optical (ATM) line card attached to the port.

CLI (ATM Port Configuration Mode)

line-timing

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

line-timing

This command instructs the system to recover the receive timing source from an external
device via the channelized line card attached to the port.

CLI (Channelized Port Configuration Mode)

line-timing

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

link-aggregation

Link aggregation combines up to four ports on a redundant pair of Quad Gig-E line card so
a large file is guaranteed to be sent serially down the same pipe rather than be distributed
and be subject to massive packet re-ordering. LACP is the link aggregation control protocol.

CLI (Ethernet Port Config Mode)

[ no ] link-aggregation { master | member } | group N }

[ lacp { active | passive } ] [ rate { slow | fast } ]

default link-aggregation lacp

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.