Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
ICAP Interface Support
▀ Configuring ICAP Interface Support
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22982-01
Configuring ICAP Interface Support
This section describes how to configure the Content Filtering Server Group (CFSG) through Internet Content
Adaptation Protocol (ICAP) interface between ICAP client and ACF server (ICAP server).
Adaptation Protocol (ICAP) interface between ICAP client and ACF server (ICAP server).
Important:
This section provides the minimum instruction set for configuring external content filtering servers
on ICAP interface on the system. For more information on commands that configure additional parameters and options,
refer CFSG Configuration Mode Commands chapter in Command Line Interface Reference.
refer CFSG Configuration Mode Commands chapter in Command Line Interface Reference.
To configure the system to provide ICAP interface support for external content filtering servers:
Step 1
Create the Content Filtering Server Group and create ICAP interface with origin (local) IP address of chassis by
applying the example configuration in the
applying the example configuration in the
Step 2
Specify the active content filtering server (ICAP sever) IP addresses and configure other parameters for ICAP server
group by applying the example configuration in the
group by applying the example configuration in the
Step 3
Configure the content filtering mode to external content filtering server group mode in ECS rule base by applying the
example configuration in the
example configuration in the
Step 4
Optional. Configure the charging action to forward HTTP/WAP GET request to external content filtering servers on
ICAP interface in Active Charging Configuration mode by applying the example configuration in the
ICAP interface in Active Charging Configuration mode by applying the example configuration in the
Step 5
Verify your ICAP interface and external content filtering server group configuration by following the steps in the
Step 6
Save your configuration as described in the Verifying and Saving Your Configuration chapter.
Creating ICAP Server Group and Address Binding
Use the following example to create the ICAP server group and bind the IP addresses:
Notes:
<
> is local IP address of the CFSG endpoint.