Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas

Página de 580
Gx Interface Support   
▀  Rel. 7 Gx Interface 
 
▄  Cisco ASR 5000 Series Enhanced Feature Configuration Guide 
OL-22983-01   
Configuring Rel. 7 Gx Interface 
To configure Rel. 7 Gx interface functionality, the IMS Authorization service must be configured at the context level, 
and then the APN configured to use the IMS Authorization service. 
To configure Rel. 7 Gx interface functionality: 
Step 1 
Configure IMS Authorization service at the context level for IMS subscriber in GPRS/UMTS network as described in 
th
  section. 
Step 2 
Verify your configuration as described in th
  section. 
Step 3 
Configure an APN within the same context to use the IMS Authorization service for IMS subscriber as described in the 
  section. 
Step 4 
Verify your configuration as described in th
  section. 
Step 5 
Optional: Configure the Volume Reporting over Gx feature as described in th
  
section. 
Step 6 
Save your configuration as described in the Verifying and Saving Your Configuration chapter. 
Important:
  Commands used in the configuration examples in this section provide base functionality to the extent 
that the most common or likely commands and/or keyword options are presented. In many cases, other optional 
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete 
information regarding all commands. 
 
Configuring IMS Authorization Service at Context Level 
Use the following example to configure IMS Authorization service at context level for IMS subscribers in GPRS/UMTS 
networks: