Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
PDN Gateway Configuration
Configuring the System as a Standalone PMIP P-GW Supporting an eHRPD Network ▀
Cisco ASR 5000 Series Packet Data Network Gateway Administration Guide ▄
OL-22985-01
Step 3
Configure the system to perform as a P-MIP P-GW and set basic P-GW parameters such as P-MIP interfaces and an IP
route by applying the example configurations presented in the
route by applying the example configurations presented in the
Step 4
Configure the PDN context by applying the example configuration in the
Step 5
Enable and configure the active charging service for Gx interface support by applying the example configuration in the
Step 6
Create a AAA context and configure parameters for AAA and policy by applying the example configuration in the
Step 7
Verify and save the configuration by following the instruction in the
Initial Configuration
Step 1
Set local system management parameters by applying the example configuration in the
section.
Step 2
Create the context where the P-GW service will reside by applying the example configuration in the
Step 3
Create and configure APNs in the P-GW context by applying the example configuration in the
Step 4
Create and configure AAA server groups in the P-GW context by applying the example configuration in the
Step 5
Create an eGTP service within the newly created context by applying the example configuration in the
Step 6
Create a context through which the interface to the PDN will reside by applying the example configuration in the
Modifying the Local Context
Use the following example to set the default subscriber and configure remote access capability in the local context: