Cisco Cisco AP541N Wireless Access Point Manual De Manutenção

Wireless Client Requirements

Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide

17

 

To connect to the access point, wireless clients need the software and hardware 
described in 

.

Wi-Fi Client Adapter

Portable or built-in Wi-Fi client adapter that supports 
one or more of the IEEE 802.11 modes in which you 
plan to run the access point. (IEEE 

802.11a

, 

802.11b

, 

802.11g

, and 

802.11n

 modes are supported.)

Wireless Client 
Software

Client software, such as Microsoft Windows 
Supplicant, configured to associate with the access 
point.

Client Security 
Settings

Security should be disabled on the client used to do 
initial configuration of the access point.

If the Security mode on the access point is set to 
anything other than plain text, wireless clients must 
have a profile set to the same authentication mode 
used by the access point and provide a valid username 
and password, certificate, or user identity required by 
the authentication server. Security modes are Static 

WEP

, IEEE 802.1X, 

WPA

 with 

RADIUS

 server, and 

WPA

-

PSK

.

For information about configuring security on the 
access point, see