Cisco Cisco Aironet 350 Wireless LAN Client Adapter
18
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 3.0
OL-8338-01
Installing the Client Adapter Software
Step 31
Check the Enable Cisco Aironet System Tray Utility (ASTU) check box if you want to be able to use
ASTU even though you have chosen to configure your client adapter through a third-party tool instead
of ADU and click Next.
ASTU even though you have chosen to configure your client adapter through a third-party tool instead
of ADU and click Next.
Step 32
When prompted to insert your client adapter, click OK. The Setup Status window appears (see
Figure 10
Setup Status Window
The installation process begins, and you are notified as each software component is installed.
Step 33
When a message appears indicating that your computer needs to be rebooted, click OK and allow your
computer to restart.
computer to restart.
Step 34
If the Windows Found New Hardware Wizard appears after your computer reboots, click Next, allow the
wizard to install the software for the client adapter, and click Finish.
wizard to install the software for the client adapter, and click Finish.
Step 35
If your network setup does not include a DHCP server and you plan to use TCP/IP, follow these steps
for your operating system.
for your operating system.
•
Windows 2000
a.
Double-click My Computer, Control Panel, and Network and Dial-up Connections.
b.
Right-click Local Area Connection x (where x represents the number of the connection).
c.
Click Properties.
d.
In the Components Checked Are Used by This Connection field, click Internet Protocol
(TCP/IP) and Properties.
(TCP/IP) and Properties.