Cisco Cisco Packet Data Gateway (PDG) Guia Do Administrador
Gy Interface Support
▀ Configuring Gy Interface Support
▄ Cisco ASR 5x00 Home Agent Administration Guide
210
Configuring Gy Interface Support
To configure Gy interface support:
Step 1
Configure the core network service as described in this Administration Guide.
Step 2
Configure Gy interface support as described in the relevant section:
Step 3
Configure Event-based Gy support as described in the
Step 4
Optional. Configure OCS Unreachable Failure Handling Feature or Assume Positive for Gy Feature as described in the
Step 5
Save your configuration to flash memory, an external memory device, and/or a network location using the Exec mode
command
command
save configuration
. For additional information on how to verify and save configuration files, refer to the
System Administration Guide and the Command Line Interface Reference.
Important:
Commands used in the configuration examples in this section provide base functionality to
the extent that the most common or likely commands and/or keyword options are presented. In many cases,
other optional commands and/or keyword options are available. Refer to the Command Line Interface
Reference for complete information regarding all commands.
other optional commands and/or keyword options are available. Refer to the Command Line Interface
Reference for complete information regarding all commands.
Configuring GGSN / P-GW / IPSG Gy Interface Support
To configure the standard Gy interface support for GGSN/P-GW/IPSG, use the following configuration:
configure
context <context_name>
diameter endpoint <endpoint_name>
origin realm <realm>
origin host <diameter_host> address <ip_address>
peer <peer> realm <realm> address <ip_address>
exit
exit
active-charging service <ecs_service_name>
credit-control [ group <cc_group_name> ]
diameter origin endpoint <endpoint_name>