Cisco Cisco Aironet 350 Wireless LAN Client Adapter

The Advanced Status window in ADU and the Connection Status window in ASTU now display the 
Current Receive Rate and the Current Transmit Rate rather than the Current Link Speed. These 
values indicate the rate at which your client adapter is currently receiving or transmitting data 
packets, respectively.

The Tool Tip window in ASTU now displays the 802.11 mode that the client adapter is using for 
communications. This value appears to the right of the Link Speed value. Possible values for the 
802.11 mode are 11a, 11b, and 11g.

This section describes how to initially install or upgrade to CB21AG and PI21AG Install Wizard 2.0 on 
a computer running Windows 2000 or XP. If the client adapter software is not installed on your computer, 
follow the instructions in the 

 section below. If you are 

upgrading your client adapter software to release 2.0, follow the instructions in the 

.

Follow these steps to install CB21AG and PI21AG Install Wizard 2.0 on your computer.

Do not eject your client adapter at any time during the installation process, including during the reboot.

Only one wireless client adapter can be installed and used at a time. The software does not support the 
use of multiple cards.

Make sure the client adapter is inserted in your computer.

If your client adapter is not inserted, the software cannot be installed.

Use your computer’s web browser to access the following URL:

Click Option #2: Aironet Wireless Software Display Tables.

If you prefer to use an automated tool, you can download software from the Software Selector 
tool instead of the display tables. To do so, click Option #1: Aironet Wireless Software 
Selector, follow the instructions on the window, and go to 

Click Cisco Aironet Wireless LAN Client Adapters.

Under Aironet Client Adapter Installation Wizard (For Windows), click 802.11a/b/g (CB21AG, 
PI21AG).

Click the Win-Client-802.11a-b-g-Ins-Wizard-v20.exe file.