Cisco Cisco Aironet 350 Wireless LAN Client Adapter

CSCeg69646—Group Policy does not work with LEAP

Group Policy does not function correctly on computers that are configured for LEAP. To work 
around this problem, use saved LEAP credentials and increase the value of the Group Policy Delay 
parameter on the Profile Management (Security) window in ADU.

Group Policy also does not function correctly on computers that are configured for open 
authentication. Group Policy operates the first time for a new user but does not work for the 
same user upon reboot. Increasing the value of the Group Policy Delay parameter has no 
effect.

CSCin58718—ADU shows invalid IP address for VxWorks access points

The ADU Advanced Status window shows an Associated AP IP Address of 0.0.0.0 when the client 
adapter is associated to a VxWorks access point. To work around this problem, upgrade the VxWorks 
access point to firmware version 12.04 or later.

If you are a Cisco registered user, you can use the Cisco TAC Software Bug Toolkit, which consists of 
three tools (Bug Navigator, Bug Watcher, and Search by Bug ID Number) that help you to identify 
existing bugs (or caveats) in Cisco software products. 

Access the TAC Software Bug Toolkit at the following URL:

For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at

Click Product Support > Wireless. Then choose your product and Troubleshooting to find information 
on the problem you are experiencing.

For more information about Cisco Aironet CB21AG and PI21AG client adapters, refer to the following 
document:

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and 
Configuration Guide, OL-4211-03