Cisco Cisco Packet Data Gateway (PDG)
threshold dcca-protocol-error
Configures alarm or alert thresholds for Diameter Credit Control Application (DCCA) protocol errors from
the Diameter server.
the Diameter server.
Product
ACS
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]
host_name
(config)#
Syntax Description
threshold dcca-protocol-error high_thresh [ clear low_thresh ]
default threshold dcca-protocol-error
default threshold dcca-protocol-error
default
Disables the threshold for configured alarm and sets the high_thresh and low_thresh values to 0.
high_thresh
Default: 0
Specifies the high threshold number of protocol error received from Diameter server that must be met or
exceeded within the polling interval to generate an alert or alarm.
exceeded within the polling interval to generate an alert or alarm.
high_thresh is an integer from 0 through 1000000.
clear low_thresh
Default: 0
Specifies the low threshold number of protocol error received from Diameter server that maintains a previously
generated alarm condition. If the number of errors falls beneath the low threshold within the polling interval,
a clear alarm will be generated.
generated alarm condition. If the number of errors falls beneath the low threshold within the polling interval,
a clear alarm will be generated.
low_thresh is an integer from 0 through 1000000.
Command Line Interface Reference, Modes G - H, StarOS Release 19
499
Global Configuration Mode Commands (T-threshold phspc)
threshold dcca-protocol-error