Cisco Cisco Packet Data Gateway (PDG)
threshold dcca-rating-failed
Configures Diameter Credit Control Application (DCCA) Rating Group (content-id) request reject, alarm or
alert thresholds.
alert thresholds.
Product
ACS
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]
host_name
(config)#
Syntax Description
threshold dcca-rating-failed high_thresh [ clear low_thresh ]
default threshold dcca-rating-failed
default threshold dcca-rating-failed
default
Disables the threshold for configured alarm and sets the high_thresh and low_thresh values to 0.
high_thresh
Default: 0
Specifies the high threshold number of requests for a block of credits due to invalid Rating Group (content-id),
rejected from the Diameter server that must be met or exceeded within the polling interval to generate an alert
or alarm.
rejected from the Diameter server that must be met or exceeded within the polling interval to generate an alert
or alarm.
high_thresh is an integer from 0 through 1000000.
clear low_thresh
Default: 0
Specifies the low threshold number of requests for a block of credits due to invalid Rating Group (content-id),
rejected from the Diameter server that maintains a previously generated alarm condition. If the number of
errors falls beneath the low threshold within the polling interval, a clear alarm will be generated.
rejected from the Diameter server that maintains a previously generated alarm condition. If the number of
errors falls beneath the low threshold within the polling interval, a clear alarm will be generated.
low_thresh is an integer from 0 through 1000000.
Command Line Interface Reference, Modes G - H, StarOS Release 19
501
Global Configuration Mode Commands (T-threshold phspc)
threshold dcca-rating-failed