Cisco Cisco Packet Data Gateway (PDG)
gtpc nsapi-in-create-pdp-response
This command excludes or includes the optional information element (IE) Network Service Access Point
Identifier (NSAPI) within "Create PDP Context Response" messages in GTP-C.
Identifier (NSAPI) within "Create PDP Context Response" messages in GTP-C.
Product
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > GGSN Service Configuration
configure > context context_name > ggsn-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ggsn-service)#
Syntax Description
[ default | no ] gtpc nsapi-in-create-pdp-response
default
Sets the default mode for GTP-C messages not to include the NSAPI IE in "Create PDP Context Response"
messages.
messages.
no
Removes the preconfigured mode for GTP-C messages; the GTP-C message will not include the NSAPI IE
in "Create PDP Context Response" messages. By default it is disabled.
in "Create PDP Context Response" messages. By default it is disabled.
Usage Guidelines
Use this command to exclude or include the NSAPI IE in "Create PDP Context Response" GTP-C messages
received from the SGSN.
received from the SGSN.
Examples
The following command configures the GGSN service to include the optional NSAPI IE in "Create PDP
Context Response" messages:
gtpc nsapi-in-create-pdp-response
Context Response" messages:
gtpc nsapi-in-create-pdp-response
Command Line Interface Reference, Modes G - H, StarOS Release 19
32
GGSN Service Configuration Mode Commands
gtpc nsapi-in-create-pdp-response