Cisco Cisco Packet Data Gateway (PDG)
operator-del-cause
Enables or disables the Cause-IE feature for Delete PDP Context Request in GGSN. This CLI is disabled by
default.
default.
This command is license dependent. For more information please contact your Cisco account representative.
Important
Product
GGSN
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > GGSN Service Configuration
configure > context context_name > ggsn-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ggsn-service)#
Syntax Description
[ default | no ] gtpc operator-del-cause
default
Sets the default mode for Operator Cause-IE behavior feature. By default, it is disabled.
no
Disables Operator Cause-IE behavior feature.
operator-del-cause
Enables Operator Cause-IE behavior feature for Delete PDP Context Request sent to delete the last PDP
Context of the PDN connection.
Context of the PDN connection.
Usage Guidelines
This command enables or disables the Cause-IE feature for Delete PDP Context Request in GGSN.
The Cause-IE configuration for Delete PDP Context Request is given in the APN configuration and is also
available in the clear subscribers CLI command. When this command is enabled, the feature will be applied
to GGSN based on the APN configuration or the clear subscribers command. This command is disabled by
default.
available in the clear subscribers CLI command. When this command is enabled, the feature will be applied
to GGSN based on the APN configuration or the clear subscribers command. This command is disabled by
default.
Command Line Interface Reference, Modes G - H, StarOS Release 19
33
GGSN Service Configuration Mode Commands
operator-del-cause