Cisco Cisco Packet Data Gateway (PDG)
authorize-with-hss
This command enables or disables subscriber session authorization via a Home Subscriber Server (HSS) over
an S6b Diameter interface. This feature is required to support the interworking of GGSN with P-GW and HA.
an S6b Diameter interface. This feature is required to support the interworking of GGSN with P-GW and HA.
Product
P-GW
SAEGW
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > P-GW Service Configuration
configure > context context_name > pgw-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pgw-service)#
Syntax Description
authorize-with-hss [ egtp [ report-ipv6-addr ] [ s2b ] [ s5-s8 ]| lma [ report-ipv6-addr | s6b-aaa-group
aaa-group-name ] | report-ipv6-addr ]
{ default | no } authorize-with-hss
aaa-group-name ] | report-ipv6-addr ]
{ default | no } authorize-with-hss
default
Disables the default authorization of subscriber over S6b interface. Resets the command to the default setting
of "authorize locally" from an internal APN authorization configuration.
of "authorize locally" from an internal APN authorization configuration.
no
Disables the default authorization of subscriber over S6b interface. Resets the command to the default setting
of "authorize locally" from an internal APN authorization configuration.
of "authorize locally" from an internal APN authorization configuration.
egtp
Enables S6b authorization for eGTP only.
s2b
Enables S6b authorization for eGTP S2b.
s5-s8
Enables S6b authorization for eGTP S5S8.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1663
P-GW Service Configuration Mode Commands
authorize-with-hss