Cisco Cisco Packet Data Gateway (PDG)
dns-client
Specifies the DNS client context to use for sending DNS queries.
Product
P-GW
SAEGW
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > P-GW Service Configuration
configure > context context_name > pgw-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-pgw-service)#
Syntax Description
dns-client context name
{ default | no } dns-client context
{ default | no } dns-client context
default
Returns the command to the default setting of targeting the DNS client in the context where the P-GW service
resides.
resides.
no
Disables DNS queries.
context name
Specifies the name of the context where the DNS client is used for the resolution of PCSCF-FQDN received
from S6b interface.
from S6b interface.
name must be an existing context expressed as an alphanumeric string of 1 through 79 characters.
Usage Guidelines
Use this command to specify the context where the DNS client resides to perform P-CSCF-FQDN resolution
from the S6b interface.
from the S6b interface.
Examples
The following command identifies the egress1 context as the context where the DNS client resides:
dns-client context egress1
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1665
P-GW Service Configuration Mode Commands
dns-client