Cisco Cisco Packet Data Gateway (PDG)
gtpc test echo
Tests the ability of a GGSN service to exchange GTP-C echo request messages with the specified SGSN(s).
Product
GGSN
Privilege
Security Administrator, Administrator, Operator
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
gtpc test echo src-address gn_address { all | sgsn-address ip_address }
src-address gn_address
Specifies the IP address of a Gn interface configured on the system in IPv4 dotted-decimal notation.
The IP address of the system's Gn interface must be bound to a configured GGSN service prior to executing
this command.
this command.
Important
all
Specifies that GTP-C echo requests will be sent to all SGSNs that currently have sessions with the GGSN
service.
service.
sgsn-address ip_address
Specifies that GTP-C echo requests will be sent to a SGSN specified by an IP address in IPv4 dotted-decimal
notation.
notation.
Usage Guidelines
This command tests the GGSN's ability to exchange GPRS Tunneling Protocol control plane (GTP-C) packets
with the specified SGSNs. This command is useful for troubleshooting and/or monitoring.
with the specified SGSNs. This command is useful for troubleshooting and/or monitoring.
This command must be executed from within the context in which the GGSN service is configured.
Refer also to the gtpu test command.
Command Line Interface Reference, Modes E - F, StarOS Release 19
544
Exec Mode Commands (D-S)
gtpc test echo