Cisco Cisco Packet Data Gateway (PDG)
Accounting Policy Configuration Mode Commands
▀ trigger-type
▄ Command Line Interface Reference, StarOS Release 18
250
trigger-type
This command enables/disables the event triggers for Rf-Gy interaction.
Product
GGSN
HSGW
P-GW
S-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > Accounting Policy Configuration
configure > context context_name > policy accounting policy_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-accounting-policy)#
Syntax
trigger-type { gy-sdf-time-limit { cache | immediate } | gy-sdf-unit-limit { cache |
immediate } | gy-sdf-volume-limit { cache | immediate } } +
immediate } | gy-sdf-volume-limit { cache | immediate } } +
{ default | no } trigger-type
default
The default behavior is to disable all the configured event triggers. The interims will be dropped if the event
triggers are received from Gy.
triggers are received from Gy.
no
Specifies to disable all the configured event triggers. The interims will be dropped if the event triggers are
received from Gy.
received from Gy.
gy-sdf-time-limit { cache | immediate }
Enables the SDF time-limit trigger for Rf-Gy interaction.
cache
: If this keyword option is configured then upon receipt of time-limit event trigger from Gy, the
container record will be cached for reporting in a future transaction.
immediate
: If this keyword option is configured then upon receipt of time-limit event trigger from Gy, Rf
will send out an interim record immediately.
gy-sdf-unit-limit { cache | immediate }
Enables the SDF unit-limit trigger for Rf-Gy interaction in Assume Positive scenario. Upon configuration of
the CLI command
the CLI command
trigger-type gy-sdf-unit-limit { cache | immediate }
, when the session
gets terminated during assume-positive case, ACR-Stop is sent with the container-level change-condition as
SERVICE-SPECIFIC-UNIT-LIMIT.
SERVICE-SPECIFIC-UNIT-LIMIT.