Cisco Cisco ASR 5700
Call Control Profile Configuration Mode
gmm rau-accept ▀
Command Line Interface Reference, StarOS Release 17 ▄
1957
gmm rau-accept
Provides the configuration to set the Follow-On Proceed (FOP) bit in the Routing Area Update Accept (RAU) message.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
gmm rau-accept follow-on-proceed { on-following-nw-procedure | only-on-ue-request }
remove gmm rau-accept follow-on-proceed
remove
Disables the SGSN from sending the Follow On Proceed bit in the RAU response.
follow-on-proceed
This keyword configures the SGSN to send FOP bit in RAU Accept message.
on-following-nw-procedure
This keyword configures the SGSN to send FOP bit when there is a following Network Procedure.
only-on-ue-request
This keyword configures the SGSN to send FOP bit only when UE requests for it.
Usage
Use this command to configure the setting of Follow On Proceed bit in Routing Area Accept Message. The
FOP bit can be set only when the UE requests for it by configuring the command option
FOP bit can be set only when the UE requests for it by configuring the command option
only-on-ue-
request
or the FOP bit can be set when there is a following network procedure by configuring the CLI
option
on-following-nw-procedure
. By default, the configuration is
gmm rau-accept follow-on-
proceed only-on-ue-request
.
Example
Use this command to configure the SGSN to send the Follow On Proceed bit when there is a following
Network Initiated Procedure.
Network Initiated Procedure.
gmm rau-accept follow-on-proceed on-following-nw-procedure